Print...

Why concurrent forces and converted static moving load results are not matching?

Answer:

Looking at the results you have included in the table, it seems you are looking at the envelope results for the moving load case, not the concurrent values.

The (min) & (max) results are generated at each activated node when non-static loads are applied.

If you go to Results >> Result Tables >> Beam >> Force, the table will present you the envelope results for the beams under the moving load case. If you want to check the concurrent force, right-click in the table, choose View by Max Value Item and activate the Shear-z and Moment-y.

Now you can see the concurrent forces for the governing shear and moment cases:

As you see above, these values match well with the static load case results that you have shown in the Excel sheet.

concurrent forces moving load

Creation date: 11/11/2018 5:15 PM Updated: 10/23/2023 4:23 PM

Max Value Item vs Moving Tracer.xlsx

DataImage94.png

DataImage70.png

DataImage3.png

Files		Sort by Name Sort by Date
	Max Value Item vs Moving Tracer.xlsx 9 KB
	DataImage94.png 51 KB
	DataImage70.png 108 KB
	DataImage3.png 300 KB