Time-varying static loads in the Dynamic Analysis of high-speed rail project
We are currently working on a high-speed Railway Bridge project. I have questions about time history analysis. We would like to create a grillage mode for our bridge for time history analysis and I don't think that point load will be appropriate for this type of model. I would like to know if it is possible to apply another type of load for time history analysis. I would like to make transverse distributions and apply load as line load (in the transverse direction). I found out that at Midas it is an option as 'Time-Varying Static Loads' and I would like to know if it is going to work the same way as 'Dynamic Nodal loads'
Answer:
Yes, you can use the Time-Varying Static Loads to apply a UDL in the Time History Analysis. However, unlike the Dynamic Nodal Loads which are applied to a node directly into the Time History Load Case, here you will need to define a static load case for each independent UDL which you want to apply in the TH Analysis with a different time or magnitude.
Files | ||
---|---|---|
DataImage33.png 6 KB |
||
HS2B_HalfThrought_v17.mcb 5 MB |
||
HS2B_HalfThrought_v17[1].mcb 5 MB |
||
DataImage47.png 139 KB |
||
CBox_1span_A1-A10.mcb 940 KB |
||
[Tutorial] Dynamic Analysis for HS2.pdf 3 MB |
||
DataImage94.png 150 KB |
||
DataImage89.png 143 KB |
||
DataImage64.png 260 KB |
||
HS2 - dynamic.zip 97 KB |