How I can separate ALL model 2 from SV vehicles in the moving load case to be able to calculate the reserve factors?
Answer:
However, I found a workaround as follows;
It is only provided after assessment to CS 454 as shown below.
However, I found a workaround as follows;
Define ALL model 2 with all lane factors equal to zero.
Define a moving load case using the combined SV 80 and ALL model 2 (all lane factors = 0). This load case will give you the effects of SV vehicle only. The effects of ALL model 2 only can be obtained by subtracting 'SV 80 Normal only' from 'SV 80 Normal'. Please refer to the attached file.
Files | ||
---|---|---|
50 FT Concrete Spans without cantilevers - Assessment SV Vehicles Normal Speed 3 Spans.mcb 881 KB |
||
50 FT test.mcb 901 KB |
||
DataImage19.png 30 KB |
||
DataImage63.png 36 KB |
||
DataImage53.png 71 KB |
||
DataImage42.png 239 KB |