notional load

Question:

How to apply notional load on each floor ? How to get the self-weight of the structure (beam, column and slab) since by using assigned floor load, the weight of the floor has to be manually applied? 

Answer:
Hello,

For the notional load, please refer to the attached file (page 3~6).
To know the self-weigh by inputting the floor load, (1) load cases for the self-weight should be defined. (2) After running analysis, check the self-weigh from story load table via Query > Weight/Mass/Load table > Story Load table.

(3) self weight load case is used in floor load, so it has floor load value. And self_frame is used in self weight load, so you obtain the value in self weight column.
Thank you.

Best regards,
Jihong Hwang


Creation date: 7/25/2018 4:50 AM (dklee@midasit.com)      Updated: 7/25/2018 2:21 PM (dklee@midasit.com)
Files   
DataImage43.png
resend
Gen 2017 (v2_1)_Release note.pdf
resend