Assign Roof Load

Question:

Kindly advise on how can I assign my roof load, if I did not model my roof. Can I use the Assign Floor Load function, I have try this but it did not work. I have also try using using the Line element but it seem that it only applicable for beam element but not wall.

For your info my roof load will only apply on the external wall perimeter, no loading should be applied on the internal wall as the wall is non load bearing. 

Answer:
Hello,


Kindly advise on how can I assign my roof load, if I did not model my roof. Can I use the Assign Floor Load function, I have try this but it did not work. I have also try using using the Line element but it seem that it only applicable for beam element but not wall.

For your info my roof load will only apply on the external wall perimeter, no loading should be applied on the internal wall as the wall is non load bearing.

I have attached my model for your reference.

Thanks & Best Regards,


Hello,

Thank you for sending your question. I will follow up as soon as possible.
Thank you.

Best regards,
Jihong Hwang

Hello,

In your model file, there is dupllicated element (171 181). Please delete a element, and then you can assign the floor loads.

Thank you.

Best regards,
Jihong Hwang
Creation date: 7/25/2018 2:48 AM (dklee@midasit.com)      Updated: 7/25/2018 12:19 PM (dklee@midasit.com)
Files   
DataImage30.png
resend
TUARAN TERRACE HOUSE 17012018.mgb
resend