Solve the following questions related to SPC Cross section.
Question:
Answer:
Hello,
Unfortunately, the attached dxf file couldn't be opened at our end. However, judging from the image, I have following comments:
Hello,
No such limitation if all the girders are to be considered together as part 1. Kindly refer the image below.
Also, the SPC file modified for current section is attached for review. Kindly let us know if further assistance would be required.
Regards,
Nandeep
Technical Manager, MIDAS
Hello Helpdesk,
I have attached docx. file with questions regarding to SPC cross-section.
You can also find dxf file with the cross -section in attachment.
Kind regards
Answer:
Hello,
Unfortunately, the attached dxf file couldn't be opened at our end. However, judging from the image, I have following comments:
1) For such a bridge section it is recommended to go for a grillage model in midas Civil. Then a composite section of girder with effective width of slab could be created. If isn't recommended to go for single line element.
2) However, for the analysis in consideration, if entire section has to be taken as 1, then all girders could be selected and assigned to part 1. However, kindly note that in this case, the 4 girders could act as 1 even without the slab and the stiffness would be quite high as compared to individual girder. One such SPC file is attached for review.
Kindly let us know if further assistance would be required.
Regards,
Nandeep
Technical Manager, MIDAS
Regards,
Nandeep
Technical Manager, MIDAS
Hello Nandeep,
I have reuploaded DXF file in the older version for opening. I have seen your model, but there are only 3 girders. I managed to do 3 as well but 4 girders not. See the previous picture ,, PSC ,,.
This was my question, if Midas includes some limitations for creating of composite cross section.
Hello,
No such limitation if all the girders are to be considered together as part 1. Kindly refer the image below.
Also, the SPC file modified for current section is attached for review. Kindly let us know if further assistance would be required.
Regards,
Nandeep
Technical Manager, MIDAS
Hello Nandeep,
thank you for your help.
Bye
DataImage52.png
Section.sec
Imported.mcb
SPC File.spc
Imported.zip
Cross-section.dxf
PSC.PNG
SPC-Composite cross-section.docx
Průřez NK-podpora 17.76 4b-2.dxf
| Files | ||
|---|---|---|
|
|
DataImage52.png
10 KB
|
|
|
|
Section.sec
3 KB
|
|
|
|
Imported.mcb
78 KB
|
|
|
|
SPC File.spc
8 KB
|
|
|
|
Imported.zip
4 KB
|
|
|
|
Cross-section.dxf
223 KB
|
|
|
|
PSC.PNG
87 KB
|
|
|
|
||
|
|