How I can separate ALL model 2 from SV vehicles in the moving load case to be able to calculate the reserve factors? 


It is only provided after assessment to CS 454 as shown below.

However, I found a workaround as follows;
Define ALL model 2 with all lane factors equal to zero.

Define a moving load case using the combined SV 80 and ALL model 2 (all lane factors = 0). This load case will give you the effects of SV vehicle only. The effects of ALL model 2 only can be obtained by subtracting 'SV 80 Normal only' from 'SV 80 Normal'. Please refer to the attached file.

Creation date: 9/20/2020 7:50 PM      Updated: 9/8/2023 12:47 PM
239 KB
71 KB
36 KB
30 KB
50 FT test.mcb
901 KB
50 FT Concrete Spans without cantilevers - Assessment SV Vehicles Normal Speed 3 Spans.mcb
881 KB